Chinese manufacture pex aluminum-plastic pipe

Short Description:

1. The aluminum-plastic pipe of good quality is also very well done in terms of small details. The spray code on the surface is very symmetrical and meticulous, and there will be no obvious defects, and the joints between the plastic layer and the aluminum layer are relatively close.

2. Because of the aluminum layer material inside, the aluminum-plastic pipe has good collision resistance. Under the circumstances allowed by the merchant To be able to experiment!

3. Look at the appearance of the aluminum-plastic pipe, whether the trademark logo and other information are printed clearly, whether the pipe information is marked, reliable manufacturers will print all the information!


Product Detail

Product Tags

IMG_4569
IMG_4569
IMG_4569
IMG_4569

Adding a layer of aluminum-plastic pipe to the surface of the plastic pipe, which mainly depends on the good plasticity of the aluminum alloy material. In order to further maintain the aluminum layer, a PE layer is added to the surface layer, and there is also a bonding layer between the PE layer and the aluminum layer, which is the commonly used five-layer structure aluminum-plastic pipe on the market, but due to social changes The aluminum-plastic pipe has also been upgraded, and the inner surface has been upgraded to PPR material, which is not only low-carbon, environmentally friendly, anti-aging, and has a long service life, but also can be melted immediately, saving time and effort, and comprehensively combining the advantages of the two! Under normal circumstances, hot water pipes can be used in cold water fields; cold water aluminum-plastic pipes cannot be used in high temperature hot water fields. In the heating market in the southern region, many masters do not understand. In many cases, ultra-low temperature heating pipes are used on high-temperature radiators. This situation seriously affects the service life of the pipelines, which is very dangerous. Choosing aluminum-plastic pipes is also a not simple technical task. You must carefully observe and have a sufficient understanding of the product.

1. The aluminum-plastic pipe of good quality is also very well done in terms of small details. The spray code on the surface is very symmetrical and meticulous, and there will be no obvious defects, and the joints between the plastic layer and the aluminum layer are relatively close.

2. Because of the aluminum layer material inside, the aluminum-plastic pipe has good collision resistance. Under the circumstances allowed by the merchant To be able to experiment!

3. Look at the appearance of the aluminum-plastic pipe, whether the trademark logo and other information are printed clearly, whether the pipe information is marked, reliable manufacturers will print all the information!

products
SELF ADHESIVE VINYL5
SELF ADHESIVE VINYL5
SELF ADHESIVE VINYL5
SELF ADHESIVE VINYL5

  • Previous:
  • Next:

  • Write your message here and send it to us